Frequently asked questions

A quantum-safe encryption gateway that protects the connections between your own locations, without replacing the network equipment you already run.

Organisations that connect sites, OT environments, their own cloud or data centre and remote users. QPN specifically supports OT environments and connections between sites, including over the public internet and in air-gapped networks.

The connection between your locations: the data in transit. It encrypts at Layer 3, so everything above Layer 3 travels encrypted with it. No software is installed on the equipment behind the gateway.

It does not replace your central firewall. It does no web filtering, no email malware scanning and no anti-virus, and it is not a defence against denial of service. It does not protect devices behind the gateway: an infected laptop stays infected.

Protection runs in two layers. The key agreement is hybrid: a classical part and a post-quantum part are combined into one session key, and neither half on its own produces a usable session key. The post-quantum algorithm in the standard product is ML-KEM, standardised in FIPS 203. Without a valid post-quantum key exchange, no connection is established.

Encrypted traffic can be recorded today and stored until it can be decrypted later. QPN does the public key exchange with quantum-resistant mathematics, so traffic captured and stored today stays protected against being broken later by a quantum computer.

The other one still holds and protects the traffic, and crypto agility allows the post-quantum algorithm to be changed if necessary.

Both handshakes, classical and post-quantum, renew every two minutes. Private keys never leave the device.

It is visible only in its encrypted form. It cannot be read in unencrypted form, and it cannot be altered without breaking both the classical and the post-quantum encryption.

The connection never falls back to unencrypted traffic. It retries automatically, and no user action is needed for it to recover.

No. The gateway sends no telemetry and has no cloud dependency.

No. QPN co-exists with your firewalls, routers and network architecture, and is integrated by adding or adapting routes. Your central firewall keeps inspecting the traffic it can read. Encrypted QPN traffic cannot be inspected, so the gateway goes in front of the firewall when that inspection has to stay, and it can sit behind the firewall when inspection is not needed on that path.

Usually adding or adapting a few routes. Beyond that it depends on your network and is worked out in the technical call. Where a site still uses public IP addresses, some devices may need to move to private addressing.

One end of a connection needs a public IP address or a DNS name. That is usually a virtual gateway in your own data centre or cloud, not the gateway at the site.

At the site, typically not. The listening side, usually the cloud gateway, opens ports on demand, only while an active connection needs them. Where a port range is needed on your external firewall, that is worked out in the technical call.

Roughly 30 minutes per gateway, covering installation, basic setup and the first connections. It assumes a laptop connected by LAN cable, an up to date browser and a good understanding of your own network and IP addresses.

The gateway, a universal power supply with a cord for your country, a Quick Install Guide and two LAN cables, 2 m red and 2 m green. You provide a laptop for the first configuration.

Up to 1 Gbit/s on a physical gateway. For more, a virtual gateway in your own environment, where the QPN software stack handles up to 10 Gbit/s.

Typically about 1 ms. It varies with CPU load, network load and distance.

Up to 100 tunnels per physical gateway, and there is no hard limit on the number of gateways in a deployment.

Two models: the Quantum Gateway 30 for up to 30 users, and the Quantum Gateway 60 for up to 60 users, which also has Wi-Fi. Both handle up to 1 Gbit/s and up to 100 tunnels. The Quantum Gateway Virtual has no user limit and handles up to 10 Gbit/s.

Yes. LEO satellite and mobile connections such as 5G and LTE, as well as all standard IP connectivity. Carrier grade NAT is not supported. 5G/LTE connectivity is available on request as an automatic backup path, and can be used with a mobile carrier of your choice.

Yes. QPN does not need internet access and sends no telemetry. Software updates come from an update server, which can also run inside your closed network.

Yes. The QPN software client is available for current Windows and macOS. Clients need no incoming firewall ports and support DHCP addresses.

As a virtual machine in your own data centre or cloud, on a supported Linux platform, with the same web interface as the physical gateways.

Industry-standard x86 hardware. It is fanless, with optional DIN rail, wall and VESA mounting.

A dashboard shows the algorithm in use and both handshake timers, classical and post-quantum, each renewing every two minutes.

Automatic updates of the algorithms and the software require an active subscription.

The contract renews automatically for the same term, unless it is terminated at least one month before the end. At the end of the contract, the physical gateways are returned.

Yes. Done by hand on site it costs up to two minutes of interruption per site. A command line procedure needs only a few seconds of service interruption.

That depends on your configuration. Build an indicative configuration with the configurator, or talk to an expert.

Answer a few questions in the configurator to see which gateways you need and where they go, then discuss it with an expert.